Hazet 4926-1/36, Operating Instructions Manual

GB

USA

9

Please lubricate the threaded spindle before each use! 

1. General Information

 •  Please make sure that the user of this tool carefully 

reads these operating instructions and fully under-
stands all information given before it is used. 

• These operating instructions contain important 

advice that is necessary for a safe and trouble-free 
operation of your Pressure Piece Set. 

• For effective use of the Pressure Piece Set as 

intended, it is essential that all safety and other 
information in these operating instructions is 
adhered to. 

• For this reason, always keep these operating in-

structions together with your Pressure Piece Set. 

•  This tool has been designed exclusively for specifi c 

applications. HAZET emphasizes that any modi-
fi cation to the tool and/or use on an application 
not detailed to its intended application are strictly 
forbidden. 

•  HAZET will not be liable for any injuries to persons 

or damage to property originating from improper 
application, misuse of the tool or a disregard of the 
safety instructions. 

• Furthermore, the general safety regulations and 

regulations for the prevention of accidents valid for 
the application area of this tool must be observed 
and respected. 

2.  Explanation of Symbols

 Attention:

 Please pay attention to these symbols!

 READ THE OPERATING INSTRUCTIONS!

 The owner of this tool set is obliged to 
observe the operating and safety instruc-
tions and should ensure that all users of 
this Pressure Piece Set use it according 
to the information given.

 NOTICE!

 This symbol marks advice which is helpful 
when using the tool.

 CAUTION! 

 This symbol marks important specifi cations, 
dangerous conditions, safety risks and 
safety advice.

 ATTENTION! 

 This symbol marks advice which if dis-
regarded results in damage, malfunc-
tion and/or other functional failure of 
the tool.

 3. Liability and Warranty

• Any deviation from the intended use 

and/or any misapplication of the tool set 
is not allowed and will be considered as 
improper use. 

• Any claims against the manufacturer and/or its 

authorized agents because of damage caused by 
improper use of the tool set are void. 

• Any personal injury or material losses caused by 

improper use of the tool set are the sole responsibil-
ity of the owner. 

4.  Spare Parts

• Only use the manufacturer’s original 

spare parts. 

• Unsuitable or defective spare parts may cause 

damage, malfunction or total failure of the tool. 

• The use of unapproved spare parts will void all 

warranty, service and liability claims as well as all 
claims for compensation against the manufacturer 
or its agents, distributors and sales representa-
tives. 

5.  Disposal

• For disposal, clean tool set and disassemble it 

according to the regulations for work safety and 
environmental protection. Components can be 
recycled. 

•  Metal components can be scrapped. 

1

  For Your Information