14
Always wear personal protective clothing and safety equipment!
햳
For Your Safety
4. Storage
The tool has be stored according to
the following conditions:
• Keep tool in a dry and dust-free place.
• Do not expose the tool to liquids or aggres-
sive substances.
• Do not store the tool outdoors.
• Keep the tool out of reach of children.
• Storage temperature: -10°C up to +40°C
• Relative air humidity: max. 60%
5. Dangers emanating
from the tool
Before each use, check the HAZET Air Tool for
full functional efficiency. Do not use the air tool
if its functional efficiency cannot be ensured or
if damage is detected. If the tool is used, when
it is not in full working order, you risk severe
injuries to persons and damage to property.
Defective tools may cause severe injury.
• Do not use tools whose on/off-switch is
defective. Tools that cannot be switched on
or off with their on/off switch are dangerous
and have to be repaired.
• Any service or repair work must be carried
out by qualified personnel only. In order to
guarantee long term operational safety, only
original spare parts of the manufacturer must
be used.
• Do not remove any safety devices and/or
housing parts.
• Do not operate the tool, if safety covers or
safety devices are missing or defective.
• For safety reasons any modification of
HAZET tools is strictly forbidden. Any modi-
fication of the tool will result in immediate
exlcusion from warranty and liability.
•
Wear work gloves and eye
protection.
Pneumatic tools
can raise chips, dust and
other abraded particles at
high speed what may result
in severe eye injuries.
Compressed air is dange-
rous. The air flow may cause
harm to sensitive parts of
the body like eyes, ears, etc.
Dust and objects being
raised by the air flow may
cause injuries.
•
Use ear protection.
Long
exhibition to the working
noise of pneumatic tools may
result in a permanent hearing
loss.
•
Wear face or dust mask.
Breathing in the steam of
some materials like adhe-
sives and tar that contain
dangerous chemicals can
cause serious harms to the
lungs and respiratory tracts.
•
Wear proper-fitting protec-
tive clothing.
Tools with
moving parts can get caught
in the hair, clothing, jewellery
or other loose objects what
may result in severe injuries.
Never wear too large clothing and/or clothing
with bands or loops which may get caught in
the moving parts of the tool. During the work,
take off jewellery, watches, identification
tags, bracelets, necklaces etc. that could get
caught in the tool. Never touch the moving
parts of a tool. Long hair should be covered
or tied together.
•
Keep children away from pneumatic
tools.
Unattended tools or tools that are
connected to the compressed air supply
may be used by non-authorized persons and
could injure them or other persons.
•
Do not use the tool in explosive atmo-
sphere.
Tools such as air drills can produce
sparks that may ignite combustible materi-
als. Never operate tools in proximity to com-
bustible substances like petrol, naphtha,
detergents etc. Work in well-cleaned and
well-ventilated areas only. Keep combustible
materials out of the work area. Never use
oxygen, carbon dioxide or other bottled
gases to power pneumatic tools.
GB
USA
Summary of Contents for 9030-1
Page 19: ...19 Notizen Notes ...
