GB
[
+49 (0) 21 91 / 7 92-0 •
\
+49 (0) 21 91 / 7 92-400
USA
4. Disposal
• For disposal, clean tool and disassemble it
according to the regulations for work safety and
environmental protection.
• Components can be recycled.
5. Appropriate Use
The grease gun 9042-1 is only intended for dis-
charging lubrication greases with viscosity class 2.
6. Included
• Pneumatic grease gun HAZET 9042-1
• Spout, inflexible 180 mm
7. Tool Elements
Container tube
Plunger handle
Gun head
Catch plate
Filler plug
Air fitting
Spout
Trigger
9
Air vent valve
8. Technical Data
Filling capacity:
aprrox. 400 g
Operating pressure:
6,3 bar
Operating air pressure:
252 bar
Burst pressure gun:
420 bar
Burst pressure gun head:
315 bar
Air inlet thread:
1
⁄
4
˝
Coupler plug:
nominal size 7,2
Weight:
1,5 kg
Dear customer,
You have made a good choice. You hold in your
hands a HAZET quality product that will make
your work easier
1. For your Safety
Before working with the tool, please read
thoroughly these operating instructions as well
as the included safety regulations for pneumatic
tools.
For effective use of the tool as intended, it is
essential that all safety and other information in this
application note is adhered to.
HAZET will not be liable for any injuries to persons or
damage to property originating from improper
application, misuse of the tool or a disregard of the
safety regulations. Any personal injury or damage to
property caused by improper use of the tool are the
sole responsibility of the operator and user.
2. Explanation of Symbols
Attention:
Please pay attention to these symbols!
ReAd the ApplicAtion note!
The operator of this tool is obliged to observe
the application note and must ensure that
all users of this tool use it according to the
information given herein.
note!
This symbol marks advice which is helpful
when using this tool.
cAution!
This symbol marks important specifications,
dangerous conditions, safety risks and safety
advice.
Attention!
This symbol marks advice which if disregar-
ded results in damage, malfunction and/or
functional failure of the tool.
3. Spare Parts
For safety reasons, only use the manufacturer‘s
spare parts.
Unsuitable or defective spare parts may cause
damage, malfunction or total failure of the tool.
The use of non-approved spare parts will void all
warranty, service and liability claims as well as all
claims for compensation against the manufacturer or
its agents, distributors and sales representatives.
9
Application Note
Pneumatic
Grease Gun
ingenious tools
9042-1
