13
HAZET-WERK
Hermann Zerver GmbH & Co. KG
;
Güldenwerther Bahnhofstraße 25 - 29 • 42857 Remscheid • GERMANY
[
+49 (0) 21 91 / 7 92-0 •
\
+49 (0) 21 91 / 7 92-375 •
^
hazet.de •
]
info@hazet.de
to water or other liquids. Dangerous voltage
discharges may occur.
• Keep any unused rechargeable batteries
away from metallic objects such as paper
clips, coins, keys, nails, screws, etc. These
objects can establish a connection between
the poles and cause a short-circuit, which
can cause sparks, flames or fires.
• Never disassemble/open the battery charger
yourself. Any improper assembly can impair
its functionality and cause a fire, an electrical
shock and/or injuries.
• All service or repair work must be carried out
by qualified personnel only. Only use original
spare parts in order to guarantee its long
term operational safety.
• Safety devices and/or cover parts may not
be removed.
• Never operate the tool when a protective
cover is missing or when not all of the safety
devices are fitted and in perfect working
order.
• If an extension cord is necessary, it must
be sufficiently dimensioned for the charger.
Cables that are not designed for the neces-
sary amperage may overheat.
• The battery may only be recharged with the
expressly designated charger. A charger
that is designed for a different type of
rechargeable battery can cause a fire in this
type of rechargeable battery.
• Only use the tool with the designated
rechargeable battery. Using any other bat-
tery may cause a fire.
• The battery and the charger heat up slightly
when recharging. This does not reduce their
functionality. Appropriate caution is required
for operation.
• Only use the battery charger at places that
are determined and prescribed by applica-
ble provisions for work areas and electrical
systems.
• Any modifications to HAZET battery charger
are strictly forbidden for safety reasons. Any
modifications to the device will immediately
void the warranty and liability.
•
Do not use the device in an explosive
atmosphere.
Electric tools such as battery
charger can cause sparks or ignite combu-
stible materials. Never operate tools in pro-
ximity to combustible substances like petrol,
naphtha, detergents, etc. Work in wellclea-
ned and well-ventilated areas only. Keep
combustible materials out of the work area.
•
Do not point the tool at another person.
Keep children and other persons out of the
work area when operating the tool.
•
Keep the battery charger, clean and free
from oil and grease.
•
Make sure that the working area is clean,
well ventilated and always well lit.
•
Never use the tool whilst under the influ-
ence of alcohol or drugs.
•
Repairs must be performed by authorised
personnel only.
• Do not clean plastic parts with solvents.
• Solvents such as petrol, benzene, carbon
tetrachloride, and alcohol can deform or
crack the plastic parts. Do not come in
contact with the above-mentioned solvents.
• When working on elevated places, always
make sure that no one is located below the
work area before you commence work.
2
For your safety
Electric energy may cause serious injuries!
Always wear personal protective equipment!
