33
HAZET-WERK
Hermann Zerver GmbH & Co. KG
;
Güldenwerther Bahnhofstraße 25 - 29
•
42857 Remscheid
•
GERMANY
[
+49 (0) 21 91 / 7 92-0
•
\
+49 (0) 21 91 / 7 92-375
•
^
hazet.de
•
]
info@hazet.de
4
Maintenance and care
Electric energy may cause serious injuries!
Always wear personal protective equipment!
Maintenance and care:
• Disconnect the battery from the tool before any maintenance or repair work.
• Check sockets regularly. Worn or damaged sockets can slip off the tool or reduce its
performance and thus damage the motor.
Motor maintenance:
• The motor unit winding/coil is the most important part of the electric tool. Handle the tool
with care to ensure that the winding/coil is not damaged or gets wet from water or oil.
Care:
• The HAZET cordless impact wrench should be regularly treated with a commercial
solvent-free cleaning agent without grinding additives.
Checking for dust:
• Dust can be removed with a soft cloth or a cloth moistened with soapy water.
• Do not use bleach, chlorine-based cleaning agents, benzene or thinner since these
can damage the plastic.
• Wash and dry plastic parts with a soft cloth dampened with soapy water.
Spare parts:
• Only use the manufacturer’s original spare parts.
• Unsuitable or defective spare parts may cause damage, malfunction or total failure
of the device.
• The use of non-approved spare parts will void all warranty, service and liability
claims as well as all claims for compensation against the manufacturer or its agents,
distributors and sales representatives.
Storage:
The device must be stored under the following
conditions:
• Keep the device in a dry and dust-free place.
• Do not expose the device to liquids and/or aggressive substances.
• Do not store the device outdoors.
• Keep the device out of reach of children.
•
Storage temperature: -10 °C to +40 °C.
•
Relative air humidity: max. 60 %.
