manualshive.com logo in svg

HBM GEN3i, User Manual

The HBM GEN3i is a powerful and versatile measurement system, perfect for a wide range of tasks. To learn more about this innovative product, be sure to download the free user manual from our website. This manual will provide you with all the information you need to maximize the capabilities of your GEN3i.

Share
Download
background image

L

Language settings in Windows ......................... 863
Laser Safety  ....................................................... 35
Lead-out  ........................................................... 138
LED indicators  .................................. 166, 171, 172
LED indicators (legacy)  .................................. 1004
LICENSE AGREEMENT and WARRANTY .......... 3
Linearity verification .......................................... 251
Local disk  ......................................................... 133

M

Mainframe  ........................................................ 131
Mainframe adapters  ......................................... 762

G070A Torque/RPM adapter ....................... 762
G072 Isolated Digital Event Adapter  ........... 775

Mainframe overview  ........................................... 78

Mainframe feature comparison ...................... 79

Mainframes

Mobile ............................................................ 78
Mobile/Rack ................................................... 78
Portable  ......................................................... 78
Rack  .............................................................. 78

Maintenance

Cleaning  ...................................................... 806
Hard disk drive  ............................................ 804
Preventive  ................................................... 803
Preventive drive replacement ...................... 804
Solid State Drive (SSD) ............................... 804

Manual trigger  .................................................. 143
Master/Slave

Trigger transfer ............................................ 163

Master/Slave card

Operating modes ......................................... 171

Master/Slave Card (legacy)

Using legacy and new mainframes in Master/
Slave setup ................................................ 1017

Master/Slave card (legacy)

Connecting  multiple  mainframes  -  Master/
Slave card  ................................................. 1017
Fiber optic cable connection ...................... 1015
Installing  and  removing  the  Master/Slave
card  ........................................................... 1007
Operating modes ....................................... 1001
Operations ................................................. 1002

Master/Slave configuration, example  ............. 1016

Master/Slave option

Fiber optic cable  .......................................... 171

Master/Slave option (legacy)

Fiber optic cable  ........................................ 1002

Master/Slave support  ......................................... 82
Memory and Time base

External Clock Divider  ................................. 932
Mainframe  ................................................... 930
Recorder/Time base groups ........................ 932

Mount GEN3i in a 19-inch rack  ........................ 904

N

Nyquist  ............................................................. 142

O

Optical Network (SFP)

Installation steps .......................................... 199

Option cards

5B Integration card  ...................................... 309
5B Integration card specifications  ............... 314
Option Carrier Card (OCC) .......................... 307

Option Carrier Card (OCC)

Option cards supported  ............................... 308

Options, to be ordered separately

1 Gbit Optical Network SFP module 1310 nm ....

760

1 Gbit Optical Network SFP module 850 nm ....

760

10  Gbit  Optical  Network  SFP  module  1310
nm  ............................................................... 761
10 Gbit Optical Network SFP module 850 nm ....

760

10Gbit Ethernet card, electrical  ................... 745
10Gbit Ethernet card, optical ....................... 744
16 pin LEMO connector pack  ...................... 735
AC Current Clamp M1V-20-2  ...................... 750
AC Current Clamp SR661  ........................... 748
AC/DC Current Clamp i30s  ......................... 746
Active differential voltage probe  .................. 800
Artifical star adapter wiring diagram  ............ 738
Artificial star adapter .................................... 737
Batteries and battery chargers  .................... 728
BNC to banana adapter ............................... 738
Breakout cables ........................................... 730
Breakout cables and panels  ........................ 730
Breakout panels  .......................................... 732
Bridge articles .............................................. 735
Bridge completion pack  ............................... 735
Burden resistor  ............................................ 736

GEN3i

I3763-3.1 en   HBM: public

1153

Summary of Contents for GEN3i









































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for GEN3i

A&D AD-1641 Instruction Manual preview
AD-1641
Brand: A&D Pages: 28
Keysight AP1200A User Manual preview
AP1200A
Brand: Keysight Pages: 97
Loadsensing LS-G6 Piconode Manual preview
LS-G6 Piconode
Brand: Loadsensing Pages: 33
Viltrus Electronics MX-7 User Manual preview
MX-7
Brand: Viltrus Electronics Pages: 87
PST MADGE TECH MicroRHTemp Product User Manual preview
MADGE TECH MicroRHTemp
Brand: PST Pages: 4
Aanderaa SMARTGUARD 5100 Operating Manual preview
SMARTGUARD 5100
Brand: Aanderaa Pages: 91
ICPDAS DL-303 Quick Start Manual preview
DL-303
Brand: ICPDAS Pages: 9
aqua metro Contoil DFM 8EDM Mounting And Operating Instructions preview
Contoil DFM 8EDM
Brand: aqua metro Pages: 20
Data Harvest EASYSENSE V-Log User Manual preview
EASYSENSE V-Log
Brand: Data Harvest Pages: 17
Xylem MJK Chatter E-MAIL User Manual preview
MJK Chatter E-MAIL
Brand: Xylem Pages: 205
MadgeTech RTDTemp101A Quick Start Manual preview
RTDTemp101A
Brand: MadgeTech Pages: 4
Enerdis Elog Getting Started Manual preview
Elog
Brand: Enerdis Pages: 4
GRAPHTEC GL450 Quick Start Manual preview
GL450
Brand: GRAPHTEC Pages: 2
ThermoWorks ThermaData 4-Channel Logger Operating Instructions preview
ThermaData 4-Channel Logger
Brand: ThermoWorks Pages: 2
Skye DATAHOG 2 Instructions preview
DATAHOG 2
Brand: Skye Pages: 2
Skye DataHog2 Manual preview
DataHog2
Brand: Skye Pages: 3
Skye DataHog2+ Manual preview
DataHog2+
Brand: Skye Pages: 59
NuFlo Barton 202E User Manual preview
Barton 202E
Brand: NuFlo Pages: 40

Brands by name

Popular brands

Load more brands