HBM PX401 Operating Manual Download

Page: 513 / 552

Diagnosis and maintenance

PMX

A4354-2.2

HBM: public

513

LED

Status

Significance

Network

status

Duo LED red/green

OFF

Not turned on, no IP address:

The

device has got no IP address (or has

not been turned on).

green

Connected:

The device has at least

one established connection to an

other device (also to the message

router).

flashing

No connections:

The device has no

established connection to any other

device, however, it has got an IP ad

dress.

red

Duplicate IP:

The device has detec

ted that its IP address is already in

use.

flashing

Connection timeout:

One or several

connections to this device are in

timeout status. This status will only

be terminated when all connections in

timeout status have been reestab

lished or when the device has been

reset.

red/green

flashing

Selftest:

The device is running a

selftest.

Summary of Contents for PX401









































































































































































































































































































































































































































































































































































Search results

Summary of Contents for PX401

Reviews:

Related manuals for PX401

Brands by name

Popular brands

HBM PX401, Operating Manual

Search results

Summary of Contents for PX401

Reviews:

Related manuals for PX401

Brands by name

Popular brands