Operating the Data Recorder
32
A4722-1.0
HBM: public
CX22B-R
You can also set up a direct remote desktop connection
(standard program of the Windows operating system).
You need to know the IP address of the device to do so.
The device is delivered with factory settings and DHCP.
So you must use the "HBM Device Manager" software
for the initial start-up at least, or work with the direct pe
ripherals.
6.2.1
A direct Ethernet line between PC and Data
Recorder
► Connect your PC and CX22B‒R via an Ethernet ca
ble, category CAT5e or higher
.
► Install the
HBM Device Manager
program, which can
be found on the HBM support sites or in the software
package
QuantumX / SomatXR system software
.
► Launch the
HBM Device Manager
program on the PC:
► Click on
Find devices
.
► Select the Data Recorder from the list, the current
address(es) of the interface are also displayed. The
module in
has the IP address 172.19.204.252.