Configuring the CX22B‒R for self-contained measurements
64
A4722-1.0
HBM: public
CX22B-R
Settings must be made in two areas to configure the
CX22B‒R for self-contained measurement:
S
You must make the applicable settings in DAQ jobs
and options in catman
EASY so that catman
EASY
loads a DAQ project and launches the DAQ job after
startup.
S
You must ensure that catman
EASY starts when the
CX22B‒R is switched on.
As usual, measurement can be started and stopped im
mediately, or via a trigger.
Procedure
► Configure your DAQ project as described in
Section
. Set up the DAQ jobs so that the data are saved
with the
Automatically on DAQ termination
setting
(
Data saving
in the
Settings
group,
Data storage
parameter).
► Save the DAQ project.
► Call up the catman
EASY options (file menu) and go
to
Program start
(
System
group).
► For
Start mode
, select an
Existing DAQ project
and
choose the project created above in the
DAQ project
line.
► Activate the option
Execute first DAQ job automati
cally
.
► Go to
DAQ channels
in the
Channels and sensors
group.
► Activate the option
Automatically deactivate faulty
channels and continue measurement
(
behavior if
channel initialization fails
).
► Exit the dialog by clicking on
OK
.
