Operating the Data Recorder
42
A4722-1.0
HBM: public
CX22B-R
6.3
Connection via remote desktop
If you do not want to use the
HBM Device Manager
pro
gram or you are working with a permanent IP address at
the recorder end, you can also set up the connection di
rectly via the "remote desktop" program (the program is a
component of the Windows operating system). In Win
dows 7, the program can be found under
All programs
−
> Accessories
.
Enter the IP address of
the CX22B‒R here
Fig. 6.5
Enter the IP address of the SomatXR CX22B-R
Procedure
► Enter the IP address of the CX22B‒R.
► Click on
Connect
.
Configuration of remote desktop
The
HBM Device Manager
program uses a minimal re
mote desktop configuration, that allows only the
CX22B‒R screen to be displayed on your PC. You can
fully configure a remote desktop connection, so that you
can also directly use your PC drives on the CX22B‒R, for