Service mode
WTX110
A4774-1.0
HBM: public
73
→Protocol
AckNak
or
NoAck
selected
Com1: Start char.
999
Enter the start character as a decimal value
(e.g. 2 = STX)
If you enter
0
no start character will be transferred
Com1: End char.
999
Enter the end character as a decimal value
(e.g. 3 = STX)
If you enter
0
no end character will be transferred
Com1: Checksum
None
Select checksum formation; the checksum is
transferred after the end character:
None
No checksum
XOR
Exclusive-Or combination
CPL
Two's complement
→If start or end character entered and a checksum selected:
Com1: With start
N
Start character is included in checksum formation
Com1: With end
N
End character is included in checksum formation
6.1.3
Setting the serial interface (
Com6 (DWB1)
)
Menu
Key
Function/Secondary selection
Interface
Com6 (DWB1)
K-WTX110-D-***-**-***-**-***-**
6.2
Enter parameter (
General
)
For more information on the keys necessary to access this menu group, go to
the
In this menu group you can set various parameters, such as the language, time
zone, date, time, etc.
Summary of Contents for WTX110
