28
Z30A
HBM
A2076-1.0 de/en
Safety instructions
Use in accordance with the regulations
Z30A type force transducers are used for high-precision force measurements
and for force reference measurements (transfer standard). Use for any
additional purpose shall be deemed to be
not
in accordance with the
regulations.
In the interests of safety, the transducer should only be operated as described
in the Mounting Instructions. It is also essential to observe the appropriate
legal and safety regulations for the application concerned during use. The
same applies to the use of accessories.
The transducer is not a safety element within the meaning of its use as in-
tended. Proper and safe operation of this transducer requires proper trans-
portation, correct storage, assembly and mounting and careful operation and
maintenance.
General dangers of failing to follow the safety instructions
The Z30A force transducer corresponds to the state of the art and is fail-safe.
The transducers can give rise to remaining dangers if they are inappropriately
installed and operated by untrained personnel.
Everyone involved with the installation, commissioning, maintenance or repair
of a force transducer must have read and understood the Mounting Instruc-
tions and in particular the technical safety instructions.
Remaining dangers
The scope of supply and performance of the transducer covers only a small
area of force measurement technique. In addition, equipment planners,
installers and operators should plan, implement and respond to the safety
engineering considerations of force measurement technique in such a way as
to minimise remaining dangers. Prevailing regulations must be complied with
at all times. There must be reference to the remaining dangers connected with
force measurement technique.
Summary of Contents for Z30A
Page 2: ......
Page 26: ...26 Z30A HBM A2076 1 0 de en...
Page 50: ...50 Z30A HBM A2076 1 0 de en...
Page 51: ...51 Z30A HBM A2076 1 0 de en...
