7 / 16
Redial from standby
1. Press [redial/p].
The phone number that was last dialed appears on the display.
2. Press [redial/p] will display one of the last three numbers dialed.
Most recent
[redial/p]
[redial/p]
[redial/p]
Standby mode
3. Press [talk]. The number will be dialed.
Redial from talk mode
1. Press [talk].
“Talk” and Volume level and Handset No. appears on the display.
2. Press [redial/p].
The last number dialed will be displayed and redialed.
3. To hang up, press [talk] or place the handset on the base.
Note Only the last number dialed c an be accessed after talk has been pressed.
Traveling Out-of-Range
During a call, as you begin to move your handset too far from your base unit, noise increases. If you pass the
range limits of the base unit, your call will terminate within 30 seconds.
Key lock/unlock
When the handset is in the ST/BY mode, press and hold [flash] key,
then sound confirm beep and display "Key Locked".
During Key Locked condition, all keys do not operate until incoming
call or press and hold [flash] key again and display “Key Unlocked ”.
<Redial 1>
95979035_
<Redial 2>
96348578_
<Redial 3>
0293953360_
Talk Mid 1
_
Talk Mid 1
95979035_
Key Locked
Key Unlocked