16
Trouble Shooting
Trouble Shooting:
Listed below are a few common problems that you may encounter, with solutions.
No light output from the unit;
1. Be sure the external fuse has not blown. The fuse is located on the rear panel of the unit.
2. Be sure the fuse holder is completely and properly seated.
Unit does not respond to sound;
1. Low frequencies (bass) should cause the unit to react to sound.
Tapping on the microphone, quiet or high pitched sounds may
not activate the unit.
Specifications
Voltage:
100 - 240V, 50/60Hz
LED:
1 x 12W White Cree LED
Power Consumption:
26W @ 120V
27W @ 230V
Dimensions:
6.25”(L) x 5.75”(W) x 10.5”(H)
159mm x 147mm x 265mm
Weight:
7 Lbs. / 3 kgs.
Beam Angle:
13 Degrees
Fuse:
3 Amp
Duty Cycle:
None
DMX:
2 DMX Channel Modes: 9 Channel Mode & 11 Channel Mode
Colors:
7 + White
Gobos:
7 + Spot
Sound Active:
Yes
Working Position:
Any Safe, Secure Position
Warranty:
2 Year (730 days)
Please Note: Specifications and improvements in the design of this unit and this manual are subject
to change without any prior written notice.
Auto Sensing Voltage: This fixture contains a automatic voltage switch, which will auto sense the
voltage when it is plugged into the power source.
HD AUDIO SYSTEM INC.
ADDRESS : 2112 Lee Ave. South El Monte, CA 91733
TELEPHONE : +1 (626) 433-0357
+1 (844) 223-7809
FAX : +1 (626) 433-0315
EMAIL : info@hdaudiosystem.com
