background image

5

4

1. Press the On/Off button and hold it. The clock display will show 3:59. To adjust the 

Keep Warm time, press the hour and then the minute button. (Remember that 
numerals will run BACKWARD when Keep Warm feature is being programmed.)

2. When desired Keep Warm time has been reached, release the On/Off button. The red 

indicator light will go off.

3. The programmed heating time will now be stored in memory, and the clock will once 

again show correct time.

AUTO PAUSE ’N SERVE:
The Auto Pause ’n Serve feature will function only if the lid is properly placed on 
the carafe.
The Auto Pause ’n Serve feature ensures that coffee will not drip for 30 seconds if the
carafe is removed from the warming plate while coffee is brewing. The carafe may be
removed during the brewing process to serve a cup of coffee, then placed back on the
warming plate to continue brewing process.
To use the Auto Pause ’n Serve feature, allow the carafe to be filled with at least one 
or two cups of freshly brewed coffee. Remove the carafe from the warming plate and
pour coffee into cup or mug directly from the carafe. Place the carafe back on the
warming plate.
WARNING: To avoid damaging the unit, spilling coffee or burning yourself, use the Auto
Pause ’n Serve feature only as directed above
. Do not attempt to serve a cup of coffee
by placing a cup or mug underneath the filter holder.

MAINTENANCE INSTRUCTIONS

This appliance requires little maintenance. To reduce the risk of electric shock, do not
open or remove bottom cover of unit
. It contains no user serviceable parts. Do not try 
to repair it yourself. Refer it to qualified personnel if servicing is needed.
TO CLEAN: At least once a month, pour one quart of white vinegar into carafe. Add cold
water until carafe is filled. Pour water and vinegar into water reservoir. Place a filter in filter
holder. Place carafe on warming plate and turn unit ON. Allow to steam and drip until
carafe is half full. Turn unit OFF, remove carafe from warming plate and let it stand for 
15 minutes.
When carafe is cool, pour liquid back into water reservoir, place carafe back on warming
plate, and turn unit ON again. Allow all liquid to drip into carafe. Turn unit OFF, and
discard the liquid in carafe.
Allow unit to cool for 10 minutes; then rinse unit by filling water reservoir with clean, cold
water, inserting a new filter and turning on, allowing water to drip into carafe. Turn unit
OFF and discard water. Wash and dry carafe and filter holder. When unit has cooled, wipe
with a dry cloth. 
The carafe, serving lid, and filter holder may be washed in warm, soapy water or on the
top rack of dishwasher. The unit can be wiped with a soft, slightly damp cloth and dried.
Never use abrasive scouring pads or cleanser. Never immerse unit in water or any
other liquid.
TO STORE: 
Unplug unit; store in its box in a clean, dry place. Never store it while it is hot 
or still plugged in. Never wrap cord tightly around the appliance. Do not put any stress
on the cord where it enters the unit, as it could cause the cord to fray and break.

programmed for the warming plate to remain operating will be shown on the display. (See
instructions for HOW TO PROGRAM THE AUTO-OFF KEEP WARM FEATURE.) When
button is released, indicator light will remain on, but clock display will return to the
present time. When brewing is complete and/or all coffee has been served, press the
On/Off button to switch the coffee maker Off (see fig. 3). The indicator light will also go off
to show that coffee maker is no longer operating.
Place lid on carafe, and then place the carafe on the warming plate. Plug into outlet and
switch ON.
When brewing is complete, remove carafe from warming plate. For safety, always pour
coffee from carafe with lid in place. To maintain serving temperature, keep carafe on
warming plate. The warming plate will automatically cycle to keep the coffee at serving
temperature. Switch OFF when carafe is empty.
FOR A SECOND POT: Turn unit off and allow to cool for 10 minutes before brewing a
second pot. If you wait less than 10 minutes, hot water left in the tubes could splash out.
To avoid this, rinse carafe, replace filter and add fresh coffee. Place carafe on warming
plate and use another container to pour cold water into water reservoir. Use the
measurement markings on the water reservoir to determine correct amount of water.
PROGRAMMABLE DIGITAL TIMER
SETTING THE CLOCK:
1. Set unit on a flat, stable surface and plug it in. The LCD clock display will flash 12:00 

until time of day is set. Note: A power failure will also cause display to flash, and it will 
be necessary to reset the clock.

2. To set the clock, press the HOUR button for a few seconds until numbers begin to 

change (see fig. 3). When desired hour has been reached, repeat procedure with the 
MIN button.

3. To distinguish between AM and PM settings, the letters PM will appear in upper-left 

corner of clock display when it is in that mode. (No such indication will be visible when
time displayed is AM.)

4. As soon as correct HOUR/MIN are programmed, remove finger from button and wait 

a few seconds until the two dots between hour and minute begin to flash. This 
indicates that time is set.

SETTING THE TIMER:
1. Be sure the push-button ON/OFF switch is in the OFF position and the indicator light 

is off. Press the PROGRAM button until the coffee cup symbol      begins to flash. 
When programming for the first time, 6:00 will begin to flash; otherwise, time 
previously programmed will flash.

2. When the coffee cup symbol      begins to flash, release the PROGRAM button, and 

program for time desired by following instructions in SETTING THE CLOCK section.

3. When programming is complete, the coffee cup symbol      will go off after 5 seconds.
4. To activate automatic operation, briefly press the PROGRAM button. The coffee cup 

symbol      will come on, and the pre-set brewing time will be displayed momentarily. 
Clock will then return to present time, but the coffee cup symbol      will remain on to 
indicate that automatic operation has been activated.

5. When the brewing process begins, the coffee cup symbol      will go off, and the 

indicator light will go on to signal that the coffee maker is operating.

HOW TO PROGRAM THE AUTO-OFF KEEP WARM FEATURE
Normally, the warming plate will begin to heat up as soon as unit is switched On. It will
remain on to keep brewed coffee hot until coffee maker is switched Off again and the red
indicator light goes out. However, unit can be programmed to keep coffee warm for up to
3 hours and 59 minutes, after which time the coffee maker will automatically switch Off.
To program the Auto-Off Keep Warm feature:

2000/3-20-33E/S.WPL.FMEYER.COF.  5/1/00  3:30 PM  Page 6

Summary of Contents for HD design TSK-196A










Reviews: