MHUB 4K (8x8) Manual
6
DISPLAY CONTROL VIA IR (FORWARDS IR)
1. Plug IR transmitter TX into the 3.5mm jack port labelled IR TX on the display receiver.
2. Place IR transmitter TX in front of the IR eye of the display (position it where you would usually point your
remote to turn on or off your TV).
3. Plug IR receiver RX into the numbered 3.5mm jack port labelled Display IR on the central hub. Make sure
the number corresponds with the display you want to control
4. Place IR receiver in a visible uncovered position where it is able to receive remote signals.
IR RX
IR TX
