Distribution:
PureLink GmbH
Available from B2B Online Portal
XTND 4K (100m) Extender Manual
5
RECEIVER (X1)
1. Stereo (OUT):
Receive stereo audio from the
transmitter via 3.5mm jack cable
2. Stereo (IN):
Send stereo audio to the transmit-
ter via 3.5mm jack cable
3. Digital In:
Send digital audio via optical cable to
the transmitter
4. IR (OUT):
Plug the supplied IR TX into this port
5. IR (IN):
Plug the supplied IR RX into this port
6. ARC Power:
This led indicates if ARC is enabled
or disabled
7. ARC Button:
Press this button to Enable ARC
extraction on your TV
8. Power LED:
This indicates that your receiver is
being powered
9. DC input:
Plug the 24V power supply into the
unit
10. LRM Button:
This button enables “Long Range Mode”
this mode disables 4K supports but increases the
effective transmission distance of 1080p content to
150m
11. LRM Enabled:
This indicates if LRM is disabled or
enabled
12. HDBaseT Input:
Connect the CAT 5e/6 cabling run
from the transmitter to this port
13. HDMI Output port:
Connect a HDMI display such as a
TV or projector
14. HDMI Power LED:
This indicates the receiver detects
a connected HDMI TV
15. Lan Ports:
Connect an ethernet cable to these ports
to provide a wired internet connection to a local
device
16. RS232 Port:
Provides bi-directional RS232 between
receiver and transmitter
7
8
9
1
10 11
12
13
14
15
16
2
3
4
5
6
OUT
IN
OUT
IN
IN
