4
Receiving Unit of HDMI-C5S4IR
Front Panel
+5V DC:
Connect to 5V DC power supply.
HDMI Signal IN:
Plug in a Cat-5/5e/6 cable that needs to be linked to the receiving unit HDMI-C5S4IR-RX.
Rear Panel
Signal Level:
Adjust the 8-level equalization control to the received HDMI signals. The HDMI signal level varies
from MAX (strongest) to MIN (weakest) for respective transmission length from longest possible range to
short distance. Please adjust the signal level from MIN to MAX and stop turning the rotary switch whenever
the audio/video is playing normally. Inappropriate signal level setting may cause overpowering issue that
would shorten the product life significantly!
HDMI OUT:
Connect to a HDMI display with a HDMI male-male cable.
IR Receiver:
Infrared 3.5mm socket for plugging in the extension cable of IR receiver
IR Blaster:
Infrared 3.5mm socket for plugging in the extension cable of IR blaster
