5
IR PASS-THROUGH
IR Extenders
IR Blaster
IR Receiver
IR Sockets
IR Blaster:
plug in the IR blaster to emit all IR command signals received from the IR receiver from the other
enf to control the devices corresponding to the IR signals.
IR Receiver:
plug in the IR receiver to receive all IR command signals from the IR remote controls of the
corresponding devices.
CAUTION!
Incorrect placement of IR Blaster and Receiver may result in the failure of the IR extenders.
Please check carefully before plugging in the IR extender to the respective IR sockets.
Warranty will not cover the damage.
Definition of IR Earphone Jack
IR Blaster
IR Receiver
1. IR Signal
2. Grounding
1 2
1
1. IR Signal [20-60 kHz]
2. Grounding
3. Power
2 3
You can buy any IR extension cables in the market that are compatible to the definition of the
IR sockets for the matrix if necessary for replacement use. However, IR cables longer than 2m
(6-ft) may not work.
