background image

                                                                                                                              Operation  instruction 

 

2

 

Notice

 

The information in this document is subject to change without notice. Every effort has been made in the preparation of this document 

to ensure accuracy of the contents, but all statements, information, and recommendations in this document do not constitute the 
warranty of any kind, express or implied.     

 
 
 

Features 

 

Extends HDMI with multi-channel digitial audio, IR and RS232 up to 330 feet (100 meters). 

 

Supports resolutions up to Ultra HD 4K x 2K (3840 x 2160 @ 30 Hz) and 1080P Full HD.   

 

5Play

TM

 convergence: uncompressed high definition Video and Audio, LAN serving, RS-232/IR controls 

 

Supports LPCM 7.1 audio, Dolby® TrueHD, Dolby Digital® Plus, and DTS-HD® Master Audio™ pass-through 

 

Supports 48bit Deep Color 

 

Supports Bi-directional IR control.   

 

CEC pass-through 

 

Supports HDCP 

 
 
Package Contents 

 

1xHDBaseT Transmitter 

 

1xHDBaseT Receiver 

 

2xIR-TX cable   

 

2xIR-RX cable   

 

2xPower adapter DC 5V 2A 

 

1xUser Manual 

 

1x Pair wall/rack mounts 

 
 

Summary of Contents for SX-EH100









Reviews: