Disclaimer:
Viewing in 3D mode may cause disorientation for some viewers. DO NOT place your HDTV
near open stairwells, cables, balconies or other objects that may cause you to injure yourself.
7
HDfury 3D Glasses and Emitter – User Manual
SimulView
TM
using Dr.HDMI , HDfury4, Emitter and Glasses
If you would like to use your HDfury 4 to play SimulView
TM
PlayStation 3D games please setup and pair
your 3D glasses to the emitter and operate the glasses in RF mode. You will need to load a SimulView
TM
3D bin EDID file on your Dr.HDMI and hook your PlayStation 3 to the HDfury4 in this manner. First
connect the PlayStation 3 to the Dr.HDMI with a HDMI cable then connect a HDMI cable from the
Dr.HDMI into the HDfury4 input. When you first turn on the PS3 please select the correct EDID bank on
the Dr.HDMI by pressing the toggle button until the bank where you loaded the SimulView
TM
EDID is lit
up. From here you just load a compatible SimulView
TM
3D games and you can switch between L/R , L/L ,
or R/R SimulView
TM
modes. (To switch SimulView
TM
mode press and hold the bottom button for 1 or 2
seconds then release and the led will flash 1 (L/R) time, 2 times (L/L), 3 times (R/R) to let you know
which mode you are in).
Operate
3D Glasses in IR Mode
To operate the 3D glasses in IR mode for use with Sony IR based 3DTV please follow these steps. Turn
the glasses OFF by holding the Top Button in for 1 or 2 seconds if they were previously turned on. To
turn them ON in IR mode press and hold simultaneously the top and bottom buttons for 1 or 2 seconds
and the glasses will then turn ON in IR mode and stay in IR mode till they are turned off.
Operate
3D Glasses in IR Mode for use with SimulView
TM
on Sony PS3 3D
Monitor
First turn the 3D glasses on in IR Mode as per the instructions above this one. When playing a
compatible game and you wish to Change PlayStation SimulView
TM
modes press and hold the Bottom
Button for 1 or 2 seconds then release and the led will flash 1 time (L/R), 2 times (L/L), 3 times (R/R) to
let you know which mode you are in. (To exit IR mode and go back to the default RF mode turn the
glasses off and the next time they are turned on they will be in RF mode (Default).
Operate 3D Glasses in IR Mode for use with SimulView
TM
on Sony IR BASED
3DTV
First turn the 3D glasses ON in IR Mode as per the instructions before this one. When playing a
compatible game and you wish to Change PlayStation SimulView
TM
modes press and hold the Bottom
Button for 1 or 2 seconds then release and the led will flash 1 time (L/R), 2 times (L/L), 3 times (R/R) to
let you know which mode you are in. (To exit IR mode and go back to the default RF mode turn the
glasses OFF and the next time they are turned ON they will be in RF mode (Default).