Disclaimer:
3
rd
party and/or custom firmware providing extra features are not covered in this manual.
40
4K Diva – User Manual
[IP PORT]:
Set the IP/telnet port of your choice here (default value is 2210).
[SET PORT]:
Click here to apply the IP/telnet port of your choice (Reboot or Power cycle required)
[REBOOT UNIT]
: Click REBOOT button to restart Diva completely.
[EXPORT CONFIG]:
Allow you to export a txt file that include the full list of Diva settings and some setup
information that can be useful for support.
[ISSUE HOTPLUG]:
Click Send button to perform a soft-reset in your setup.
[CLEAR ALL SETTINGS TO FACTORY DEFAULTS]:
Type
RESET
in the factory def text field and click the
available RESET button to clear all settings to factory defaults. Diva power cycle needed.
[EDID FACTORY SETTINGS]:
Click the available check box to clear all EDID settings to factory defaults and
type
RESET
in the test field. Finally click the
RESET
button and unit EDID will be reset to factory defaults.
[FW UPDATE]:
Select the Diva firmware file and click SEND to upload it. Wait for Diva to reboot
automatically, once Diva is rebooted, refresh the webserver page.
[REFRESH]
: Refresh the current page.
