Disclaimer:
3
rd
party and/or custom firmware providing extra features are not covered in this manual.
41
4K Diva – User Manual
Updating your Diva Firmware via web browser
The Diva Firmware can be updated from any web browser based device.
If you meet any issue updating your Diva firmware, please try using Chrome Browser on your device.
You can download the latest Firmware version for your Diva device from the Download Tab on the Diva
Product page:
. If you are unsure about your Firmware version currently in use, simply refer to OLED
display on your unit. Alternatively, FW version is reported on any header of any page when accessing the
embedded web server.
Once downloaded and extracted, you should have a directory on your computer with the following files
You will have to run both Diva MCU and Diva FPGA Updates to successfully upgrade your Diva.
Note: Version number could be different depending on the FW revision you downloaded.
You can start by any of them; there is no particular order to respect.
After updating the Diva firmware, you will be prompted to refresh the webpage once unit have
rebooted, you won’t see any light or OLED info for about 15s as the unit is restarting and reconfiguring
itself. Once ready, OLED and light will come back on.
Visit Diva webserver and browse to the bottom on the CONFIG section.
Click
Choose File
as shown on the above picture and select Diva firmware file.
Once correct Firmware file is selected, its name will appear on the config page. Simply click SEND button
to start flashing the firmware to your unit.