Disclaimer:
3
rd
party and/or custom firmware providing extra features are not covered in this manual.
33
4K Diva – User Manual
Diva Web Server CEC/RS232 Section
[ENABLE CEC]
must be checked in order to apply the selected dropdown options to the Diva unit.
Once activated it allows Diva to answer and process CEC requests and commands and appear on the TV
CEC network map.
Uncheck it if you do not want Diva to answer external CEC requests or process
Internal CEC commands. Unchecking will remove Diva from the Root(TV) network map but CEC
commands for connected sinks or sources will still pass-thru.
[CEC TYPE] Video Processor (Default)
is the device type to choose if you have an AVR in your setup and
if you want to use that AVR for ARC or CEC.
[CEC TYPE] Audio Processor
is the device type to choose if you want Diva ARC feature to be ON (Sound
from TV ARC to Diva HDMI audio out, 5.1 Optical Out or Jack Analog Stereo output.
[Enable DD+/ATMOS ARC]:
If your AVR is capable of accepting more than Dolby Digital or DTS or if can
take 192khz Audio via its optical input, you can use Diva to extract DD+ and Atmos from TV embedded
streaming APPS and forward it to your AVR via the Diva HDMI audio out or optical output. Only a very
few AVR on the market can support 192khz via optical in such case, use HDMI audio out to feed
DD+/ATMOS to your AVR input.
[SEND CEC TEST COMMAND]:
Enter the CEC command of your choice in this text field in HEX format.
If you are not sure about how to format your command, we recommend you to visit the very well done
