Disclaimer:
3
rd
party and/or custom firmware providing extra features are not covered in this manual.
10
4K Linker – User Manual
Scaling Mode Selection
Scaling Mode slide switch has 3 positions.
The switch should be set to the middle position to allow control via USB.
[Upscaling Mode]
: In this mode an incoming FHD 1080p signal will be upscaled to DCI/UHD 4K/2160p
up to 600MHz if the connected display is capable of receiving such signal.
[Scaling Jus GU]:
When coupled with EDID in Automix mode, the Linker unit makes sure that the
conversion will always output a working signal. It will ensure that if a display does not support 4K then
an incoming FHD 1080p signal won’t be upscaled and an incoming UHD 4K signal will be downscaled.
Such automation is cancelled when unit is running with EDID in Custom mode.
[Downscaling Mode]:
In this mode a 4K/2160p DCI/UHD signal will always be downscaled to FHD 1080p.
Note on HDCP:
Both inputs accept HDCP1.4/2.2. Output can work with HDCP1.4/2.2 devices.