Disclaimer:
3
rd
party and/or custom firmware providing extra features are not covered in this manual.
11
4K Linker – User Manual
Combo Hold RST + Press INP to select Preset Mode
For users without access to GUI for Windows PC, we added a dual-button combo, when RESET is pressed
down and INPUT is clicked the
CS
(Color Space) and
DC
(Deep Color) mode presets cycle between
1.
Normal operation, clear all 4k30/4k60 presets, clear all deepcolor/colorspace to defaults.
2.
Set 4k30/4k60 presets for a 4K30 deepcolor PJ > 300MHz (e.g Wireless UB/TW Espon)
[4K30 all -> 4K30 all, 4k60 600MHz -> 4k60 420 300MHz]
3.
Set 4k30/4k60 presets for a 4K30 deepcolor PJ at 300MHz (e.g Wired UB/TW Epson)
[4k30 8/10/12 -> 4k30 422 12 300, 4k60 600MHz -> 4k60 420 300MHz]
4.
Set 4k30/4k60 presets for a 4k60 420 300MHz TV
[4k30 8/10/12 -> 4k30 8, 4k60 600 -> 4k60 420 300]
5.
Set 4k30/4k60 presets for a 4k30 8-bit 300MHz TV
[4k30 8/10/12 -> 4k30 8, 4k60 all-> 1080p60 444 8/10/12]
6.
Set 4k30/4k60 presets for a 1080p60 TV
[4k30 8/10/12 -> 1080p30 8/10/12, 4k60 all-> 1080p60 444 8/10/12]
7.
CS follow / DC follow
8.
CS 4:4:4 / DC follow
9.
CS 4:2:0 / DC follow
10.
CS 4:4:4 / DC 8 bit
11.
CS 4:2:0 / DC 8-bit
HOLD RST press INP button
X number of times to select any of the above preset modes
Ex: Hold RST and press 8 times INP button to select
Color Space
: 4:4:4 /
Deep Color
: follow
Note:
More advanced options are available via the GUI for Windows PC. Follow means Follow Input.
If any of the other quick presets is selected, the current/last mode in use is disabled automatically
