Disclaimer:
3
rd
party and/or custom firmware providing extra features are not covered in this manual.
12
4K Vertex – User Manual
Scaler Settings
Scale slide switch has 3 positions.
The switch should be set to the middle position to allow control via USB, IR, RS232 or a Bluetooth
device.
[No Scaling/Passthru]
: What comes in/goes out, untouched.
[Custom Scaling/GUI]:
This slide switch position will make use of custom defined scaling rules and allow
change via Bluetooth, IR, RS232 or via USB.
[Auto Scaling]:
In this mode, Vertex will auto-scale signals based on sink capabilities.