Disclaimer:
3
rd
party and/or custom firmware providing extra features are not covered in this manual.
22
4K Vertex – User Manual
This confirms the FPGA update process is completed; you can process to next step.
After power cycling your Vertex unit, you won’t see any light or OLED for about 15s as the unit is
reconfiguring itself. Once ready, OLED and light will come back on. This is only valid for any FPGA
update.
MCU Update Instructions
Double-click UpdateMCU executable (if needed, right-click and select Run as Administrator)
The below window will open.
Click
Update Firmware
as shown on the above picture.
Flashing time is less than 5 seconds.
Once completed, you will hear a windows notification sound and the below window will pop up.
