Disclaimer:
3
rd
party and/or custom firmware providing extra features are not covered in this manual.
85
4K Vertex – User Manual
Highlight Features:
Signal info is everywhere!
Whether it is on OLED, OSD, Windows GUI or via Android/iOS APP with the optional
GoBlue
, your setup
info is always available at first sight.
Unique HDCP Doctor
Providing a total of 6 HDCP 1.4 and 2.2 engines for decryption/encryption, HDfury Vertex offers a total
HDCP workaround solution including HDCP 2.2 > HDCP 1.4 and HDCP 1.4 > HDCP 2.2 both ways
conversion within the same unit. It is capable of connecting any HDCP1.x or HDCP2.x source devices to
any HDCP1.x or HDCP 2.x sink devices. Each RX block decrypts the input first whether its 1.x or 2.x. Then
each output port can individually encrypts it to 1.4(both) or 2.2(only top port) or not encrypt it at all if it
was not encrypted initially. Dual conversion can be operated on both channels simultaneously.
Ultra-Scaling up to 4K60 4:4:4 600MHz
HDfury Vertex offers impressive scaling modes to ensure that any HDMI/HDCP revision sink device get
fed at its max capabilities ALWAYS and GUARANTEED.
Featuring Upscale, Downscale, Passthru and Bypass mode as well as Chroma Conversion and Color
Space and Color Depth modification on the fly at 8, 10, 12 and 16bit for FHD, UHD and DCI 4096x2160p.
Each output can be set with individual scaling rules.
Display HDCP 2.2 Content with Non-HDCP2.2 Compliant Devices
HDCP 2.2 is the new copy-protection scheme for 4K UHD content. Not only it is not backward
compatible but many recent 4K devices don’t even support it. Source devices, including media servers
and head-ends like Netflix, will encode their 4K content with this new scheme. TVs must be HDCP 2.2-
enabled to play it, and everything in the video chain including switches and receivers must be compliant
as well, or the display will go dark and/or display a HDCP error message. Bad news for consumers who
have purchased expensive, high-bandwidth, processor-rich switchers, receivers and displays to
accommodate 4K. While the newer products may support the bandwidth needs of 4K, they won’t play
copy-protected works until Vertex is an active part of the setup.
2×2 Splitter up to 4K60 4:4:4 600MHz 18Gbps
Splitting any signal up to 4K60 4:4:4 600MHz signal is now a reality, thanx to IR/USB/RS232/ push
buttons or Bluetooth (with
GoBlue
), you can easily switch between 2 inputs that will be replicated to 2
outputs. HDCP conversion can be configured and applied on the fly in order to always output the type of
HDCP signal encryption that your display or sink device is expecting.
