HDfury3.com
28
HDfury3 User Manual
Specifications
Overview
•
2x HDMI 1.3 input with Deep Colour support (Manual or Auto switch mode
available, user selectable)
•
Component (YPbPr/YCbCr) and VGA (RGBHV) video output
•
Sound output in both Analog and Digital Optical (S/PDIF 5.1 Dolby/DTS) through
an innovative 3.5mm combo jack
•
4x EDID banks (2 per channel)
•
Built-in user selectable output resolution limit settings
•
Customization settings available through DIP SWITCH
•
Perfectly and automatically center image in all standard NTSC/PAL component
modes
•
Manually adjust horizontal screen position in all NTSC/PAL RGBHV modes
•
Performs Colour Depth Upscaling in all modes (ON/OFF user selectable)
•
Sync Polarity Inverter included
•
Automatic SD/HD color-space selection
•
Accept third party accessories on its output
•
Improved output cable driver for driving long cable runs (40-50')
•
Software upgradeable (firmware and EDID)
Details
•
Input: 2 x HDMI v1.3 (DVI 1.0 compatible)
- Switch: Auto / PortA / PortB
•
10-bit deep color HDMI native support
•
Output: VGA FEMALE output connector, 10 bit analog resolution.
•
HDCP supported (Integrated HDCP decipher engine, Pre-programmed HDCP
key)
•
Horizontal shift capability for RGB output mode
- Enabled with a dip-switch, applied with push-buttons
•
Output sync polarity selector for RGB modes (dip switch)
•
Output format: Either RGB or YPbPr, dip-switch selectable
- YPbPr requires VGA->3RCA breakout cable
•
All HD/SDTV formats from 1080p down to 480i, NTSC and PAL
- Including 1080p @ 72Hz PAL and NTSC (for RGB output only)
- Including 1080p @ 24Hz PAL and NTSC
•
11-bit 225MHz DAC processing (for true 10-bit analog output)
•
Two separate Internal EDID EEPROM with complete CEA861 extension block
Summary of Contents for HDfury3
Page 1: ...HDfury3 USER MANUAL ...
