Disclaimer:
3
rd
party and/or custom firmware providing extra features are not covered in this manual.
18
Ultra AVR Key – User Manual
[EDID UP: 4K60 600MHz HLG/HDR10+]:
In this mode, no matter the connected sink video capabilities,
AVR-Key will always present Full Video capabilities to the source, except for Dolby Vision that require
the Video slide switch to be in the middle position.
[EDID MID: OUT SINK EDID MODE]:
Default setting that will use Video capabilities from the connected
display/sink and mix them with Audio capabilities defined by audio slide switch (if any, see audio options
p.8) if nothing is connected to BOT, it will use 4K60 600MHz HLG/HDR10+ as default.
If you have a Dolby Vision display, you must use this setting.
[EDID DN: 4K60 600MHz SDR]:
Special Video EDID mode to force some capable UHD BR players to
output 4K BT2020 SDR instead of 4K BT2020 HDR.
Note:
Video slide or GUI settings will override the results even if nothing is connected to BOT. If video
slide or GUI settings are in the middle and nothing is connected to the BOT then
[4K60 600MHz
HLG/HDR10+]
will be used and any audio is normally handled by the Audio slide switch or GUI settings.
[Full HDMI Audio]
: In this mode, no matter the connected sink audio capabilities, AVR-Key will always
present Full HDMI Audio capabilities to the source, including Atmos, DTS:X and all latest.
[BOT Video + TOP Audio]:
Default setting that will use Audio capabilities of the connected AVR and mix
them with Video capabilities of the connected display (if any, see video options p.10)
[STEREO Limited]:
In this mode, no matter the connected sink audio capabilities, AVR-Key will always
present L/R Audio capability to the source. It can be used as a testing mode to ensure sound in every
setup/situation.
Note:
You can also switch Audio EDID mode and any others control from the USB GUI for Windows PC or
via the Android/iOS APP or IR using the optional
GoBlue
.
Audio slide or GUI settings will override the results even if nothing is connected to the TOP. If audio slide
or GUI settings are in the middle and nothing is connected to the TOP, then
[Full HDMI Audio]
will be
used. Both slide switches Default/Factory setting is to the middle position to follow sink capabilities.
