Disclaimer:
3
rd
party and/or custom firmware providing extra features are not covered in this manual.
6
Ultra AVR Key – User Manual
Power/Status LED
The AVR-Key logo will glow Blue when in use. When the AVR-Key first receives an HDMI signal the logo
will quickly turn on, then off, and then on permanently to indicate that the HDCP handshake has been
completed.
The status of the blue logo may be used for troubleshooting:
[Logo OFF]
: Insufficient power or no incoming signals. Use the AVR-Key power supply, make
sure the source and sink devices are correctly connected and ON.
[Logo ON]
: The AVR-Key is powered and receiving and decoding a HDMI signal.