Disclaimer:
3
rd
party and/or custom firmware providing extra features are not covered in this manual.
13
4K Vertex² – User Manual
Help on AUDIO/CEC/ARC/eARC connections
OLDER AVR/SINK
OUTPUT
Any 1080p HDR or SDR only
capable equipment can be
connected to this output and get
full HDMI sound and video.
Make sure the EDID presented by
Vertex² to the sources at inputs
reflects its audio capabilities.
FRONT
BACK
eARC LINK
Vertex² can extract up to Atmos
HBR over TrueHD from capable
eARC TV connected at TX0 and
output it via AUDIO OUT to feed
any AVR input capable of decoding
such format.
HDMI AUDIO
OUTPUT
Self-generated 720p/1080p
video signal that can include
full audio from:
Any source devices at Vertex²
inputs, eARC or ARC from TX0.
SPDIF or L/R
Analog OUT
Extract HDMI sound
coming from any source
devices at Vertex² inputs.
SPDIF can also output ARC
from TX0.
No Audio format manipulation.
Vertex² cannot manipulate Audio and otherwise transform Audio format, what comes IN goes OUT untouched.
Therefor if you plan to extract STEREO, incoming signal from HDMI source at Vertex² inputs should be STEREO.
If incoming signal from HDMI inputs are superior to STEREO (ex ATMOS) then STEREO output cannot be used.
CEC Master is always TX0
