4 Planning and installation – Installing the heating system
58
I
NSTALLING
THE
CONNECTING
PLATE
11.
Install the middle connecting plate (1) between the front cladding
(1) and the upper rear cladding with the M6 hexagon sockets
screws (size 4).
I
NSTALLING
THE
SIDE
CLADDING
12.
Open cladding packet “2”.
13.
Attach the lower side cladding (2) on the feed side to the front
cladding with the M6 hexagon socket screws (size 4) (1 + 3).
14.
Attach the lower side cladding (2) on the feed side to the rear
corner support with the M6 hexagon socket screws (size 4) (4 + 5).
Figure 4/36 - Installing the middle connecting plate
1
Ensure that the clearances always run parallel when installing the
cladding.
Figure 4/37 - Installing the side cladding on the feed side
2
1
3
5
4