2: H1.SODD V2 supports HDPLEX 80W AC-DC+160W DC-ATX combo. HDPLEX 160W DC-ATX
must be installed on the H1 bottom plate.
H1.SODD V2 also supports HDPLEX 160W DC-ATX/400W HiFi DC-ATX+External AC
Adapter/Linear Power Supply combo.
H1.SODD V2 does NOT support HDPLEX 160W AC-DC+160W DC-ATX combo.
3: Install the Slim ODD rack using two M5 Cup head screws. Push the ODD rack to the top and
tighten the M5 Cup head screw using the M5 wrench. Install the optical drive using four M2*4
screws.
HDPLEX has designed a unique eject button connecting to the USB 2.0 onboard port to eject
optical drive via OS command. The HDPLEX eject button does not rely on optical drive's own
eject button. Download Windows 10/8/7 and Linux Drivers below:
https://www.hdplex.com/pub/media/image/Product/H1.SODD/installation/Eject.rar
https://www.hdplex.com/pub/media/image/Product/H1.SODD/installation/ejectd.tar.gz
Plug the eject button USB 2.0 on to the motherboard USB 2.0 port. Install the HDD rack.
Test the H1.S thoroughly and complete the installation by closing the top plate using
4pcs
C
.
If the distance between the two side panels is too narrow for top plate to fit in, loose the top
right and left M4 HEX screws on the back plate and silver HEX screw on the aluminum
heatsink top. Insert the top plate half way and tighten those screws again.
