H1 CPU Heatsink System Installation
Install four feet with rubber cushion to the bottom plate via 4pcs M*6 HEX screw
C
. Install
four 7mm hexagonal copper stud
F
on the bottom plate ITX motherboard installation position
and attach M3 nut
H
to the hexagonal copper stud from the back. This will firmly lock the
copper stud.
Install power button, USB 3.1 Type C internal cable, and front panel audio cable to the side
plate. Use two
D
M3*8mm screw to install the USB 3.1 Type C cable. Please make sure the
USB 3.1 Type C port is fully inserted and is even with external surface. Lock power button
from the internal side and 3.5mm audio jack from external side. Both PWR and PWR LED plug
do not have polarity. PWR LED will light up in blue color once PC is turned on.
