CPU Heatsink System Installation
Install four feet with rubber cushion to the bottom plate via 4pcs M4*6 HEX
screw
C
. Install 7mm copper stud
F
on the bottom plate motherboard
installation position. Use M3 nut
H
to lock the copper stud from the back.
Install power button, USB 3.1 Type C internal cable, and front panel audio cable
to the left side plate.
Use two M3*8mm screw
D
to install the USB 3.1 Type C cable. Please make sure
the USB 3.1 Type C port is fully inserted and is even with external surface. Lock
power button from the internal side and 3.5mm audio jack from external side.
Both PWR and PWR LED plug do not have polarity. PWR LED will light up in blue
color once PC is turned on.
Install two side heatsink panels on to the H3 bottom plate using 4pcs
C
. The side
panel with power button, and USB/Audio port is installed on the left side.
