When you have selected the desired brightness, press and hold the button for two
seconds. Your light will come on steady while you hold the button and then turn off
when it is time for you to release the button.
If you have not pushed the button within 10 seconds, if you enter an unknown menu
command, if you do not hold the button down until the the light turns off or if there is
insufficient power to save the settings, your light exits the Brightness Menu without
changing the brightness setting and displays the error flash sequence consisting of rapid
flashing.
Options Menu
The Options Menu is used to turn on and off optional features of your light. Each
option will be covered separately, but the basics of turning on and off an option is
common to all options.
You enter the Options Menu by 10-clicking the button while your light is turned off.
Your light toggles on and off while you are clicking but this is normal. If you don’t
want to count, just keep clicking until your light stays on.
Each option has a unique flash identifier and a well known position in the menu. When
you enter the Options Menu, you always enter at the first menu item. Click the button
to sequence through the options. Double-click to reverse the sequence and move to the
previous menu item. The menu wraps around from the last item to the first item and
vice versa.
When you have selected the desired option, press and hold the button for two seconds.
Your light will come on steady while you hold the button and then turn off when it is
time for you to release the button.
If you have not pushed the button within 10 seconds, if you enter an unknown menu
command, if you do not hold the button down until the the light turns off or if there is
insufficient power to save the settings, your light exits the Options Menu without
changing the option setting and displays the error flash sequence consisting of rapid
flashing.
Option 1: Strobe
The Strobe option flashes the maximum brightness about every second. This can be
used for an emergency beacon.
