To stop the strobe signal, turn your light off.
The strobe signal option is the first item in the Options Menu and is identified in the
Options Menu by the strobe signal.
Option 2: SOS
The SOS option flashes the international emergency SOS signal. The SOS signal
complies with 46CFR161.013-7 for signal timing but your light is not a Coast Guard
approved emergency signal.
To stop the SOS signal, turn your light off.
The SOS signal option is the second item in the Options Menu and is identified in the
Options Menu by the SOS signal (dot, dot, dot, dash, dash, dash, dot, dot, dot).
Option 3: Locator Flash
The Locator Flash option dimly flashes your light every 3 seconds when it is turned off.
This allows you to find your light in the dark.
The Locator Flash option is a toggle setting. Setting it once turns it on while setting it
twice turns it off. The default setting is off.
The Locator Flash option is the third item in the Options Menu and is identified in the
Options Menu by a dim flash.
Option 4: Force Setting
The Force Setting option forces your light to always turn on to the selected setting. To
select a setting to be forced, ensure the Force Setting option is disabled. Then select the
Minimum, Maximum, Primary or Secondary setting you want to force. Turn your light
off. Enter the Option Menu and enable the Force Setting option. Your light will turn on
to the selected setting.
Note: this option must be disabled in order to use the Brightness Menu to change the
other settings.
