H D S m u s i c
Page
10
owners manual
HDS Pro.Sound.1
EDIT THE PERFORMANCE
The method to edit the PERFORMANCE is the same process already explained for the GM2 default mode. The
PERFORMANCE mode possesses a very important feature, it’s possible to store (and recall), in the instrument
memory 99 different settings, which are retained in the modules memory after turning off the instrument.
To enter the PERF edit mode press the EDIT button
on the panel
The PART (CH) parameter is automatically selected, mean-
while its current value it's visualized in the display
The available parameters in PERFORMANCE mode are the same already explained in the GM2 mode. Please refer to the pages 6-8 of this
manual, for the complete editing procedure.
NOTES
The parameter set directly available from the panel of the HDS Pro.Sound.1 module, both in GM2 or PERF mode is a reduced set than available
in the instrument, (this is due to the simplifi ed navigation system used in the module). The best way to fully edit the HDS Pro.Sound.1 performance
is to use the PC EDITOR software included in the package. This software allows you to easily create or edit all kinds of performances!
MEMORIZE THE PERFORMANCE
Modifying any parameters value, the PERF LED
on the panel start blinking, visualizing the edit
status.
STORE THE EDIT IN THE SAME PERFORMANCE LOCATION
STORE THE EDIT IN THE SAME PERFORMANCE LOCATION
STORE THE EDIT IN A DIFFERENT PERFORMANCE LOCATION
STORE THE EDIT IN A DIFFERENT PERFORMANCE LOCATION
Once your PERFORMANCE edit it's complete press the
blinking PERF button on the display.
At this point both the PERF button and the digit
"P01" in the display (indicating the number of the
edited performance in this example), blink at the
same time.
Keep pressed the PERF button at least for 2 seconds
to store in the current location. The display show the
message "STR" (STORE).
1
2
3
Once your PERFORMANCE edit it's complete press the
blinking PERF button on the display.
1
At this point both the PERF button and the digit
"P01" in the display (indicating the number of the
edited performance in this example), blink at the
same time.
2
It's now possible to select another PERF location using
the DATA
buttons. It's possible to select any of
the 99 available memory locations.
3
Once the desidered memory location is reached, keep
pressed the PERF button at least for 2 seconds to store
data. The display show the message "STR" (STORE).
4
4
Once the procedure is complete the "STR" display mes-
sage will stop blinking. Releasing the PERF button the
number of the current PERFORMANCE is showed again
in the display, to confi rm the STORE operation.
Once the procedure is complete the "STR" display message
will stop blinking. Releasing the PERF button the number of
the current PERFORMANCE is showed again in the display,
to confi rm the STORE operation.
Summary of Contents for HDS Pro.Sound.1
