4/ 15
5. Operation Controls and Functions
5.1 Encoder Panel
Items
Name
Description
1
POWER
System power status LED
2
STATUS
System working status LED
One second period flickering means product working normally.
Always on means system worked abnormally, this time you
need to reset product by pressing reset button on the front
panel or plugging power supply on the rear panel (you need
plug CAT cable if product is using POE for power supply).
3
RESET
System reset button.
Short pressing (<5 seconds) will reset product.
Long pressing (over 5 seconds) will let product enter firmware
upgrade mode.
4
RS-232
Connect third-party control system to control this product
utilizing our API commands or control other devices be
connected to our products (including encoders and decoders)
via RS-232 port (this is called RS-232 pass-through).
5
DEBUG
System debug port
6
AUDIO OUT
Analog stereo audio output
7
AUDIO IN
Analog stereo audio input
8
HDMI IN
HDMI input port, connect to HDMI source device
9
HDMI OUT
HDMI loop out (default video only no audio, you can enable
audio from Web GUI or API)
10
CHANNEL
Reserved use
11
LAN(POE)
Connects with Hub or router for sending data to decoder.
12
DC 12V
Connects with 12V/1A power adapter supplied in the package
or doesn’t need this if an IP switcher/router/hub with POE
feature be connected.
1
2
3
4
5
8
6
7
9
10
11
12
Summary of Contents for HDTV10016x16
Page 1: ...VER 1 1 ...
Page 7: ...6 15 6 Connection Diagram ...
