HDTVMT0808140
User
manual
HDTV Supply, Inc.
Contact: support@hdtvsupply.com
17
①
Set EDID mode for selected Input port or All Input ports, click “Set” button to complete
action.
NOTE: When set User1/User2 EDID mode, should Download EDID content to User1
Memory/User2 Memory first. User1/User2 default EDID content is 1080p, Stereo Audio
2.0.
②
Copy EDID from Output port to selected Input port or All Input ports, click “Copy” button
to complete action.
③
Read EDID content from Output port and display in grid, click “Read” button to complete
action.
④
Save EDID content which displayed in grid to binary file (file extension is “.bin”)
⑤
Open EDID binary file and display in grid
⑥
Download EDID content which displayed in grid to selected Input port or All Input ports,
click “Download” button to complete action. When User1 Memory/User2 Memory
selected, download EDID content to respective memory then User1/User2 EDID mode
can be set.
⑦
EDID content displaying grid
NOTE: EDID content displayed in grid is read only.
⑧
Click to clear EDID content displayed in grid
“IR Configuration” page
To enable or disable IR control function. When box checked, IR control function enabled,
otherwise, IR control function disabled. This setting is not memorized. IR control function is
always enabled after power up.
“FW upgrade” page
