background image

HDTVMT0808140

 

User

 

manual

 

HDTV Supply, Inc.

Contact: support@hdtvsupply.com

 

 

19

 

Maintenance 

Clean this unit with a soft, dry cloth. Never use alcohol, paint thinner or benzene to clean this 
unit. 

Warranty Policy 

HDTV Supply

 products are warranted against defects in material and workmanship for two 

years from the date of shipment. During the warranty period, 

HDTV Supply

 will, at its option, 

repair or replace products that prove to be defective. Repairs are warranted for the 
remainder of the original warranty or a 90 day extended warranty, whichever is longer.  

For equipment under warranty, the owner is responsible for freight to 

HDTV Supply

 and all related 

customs, taxes, tariffs, insurance, etc. 

HDTV Supply

 is responsible for the freight charges only for return 

of the equipment from the factory to the owner. 

HDTV Supply

 will return the equipment by the same 

method (i.e., Air, Express, Surface) as the equipment was sent to 

HDTV Supply

.  

All equipment returned for warranty repair must have a valid RMA number issued prior to 
return and be marked clearly on the return packaging. 

HDTV Supply

 strongly 

recommends all equipment be returned in its original packaging.    

HDTV Supply's

 obligations under this warranty are limited to repair or replacement of failed 

parts, and the return shipment to the buyer of the repaired or replaced parts. 

Limitations of Warranty

 

The warranty does not apply to any part of a product that has been installed, altered, repaired, or 
misused in any way that, in the opinion of 

HDTV Supply

, would affect the reliability or detracts from the 

performance of any part of the product, or is damaged as the result of use in a way or with equipment 
that had not been previously approved by 

HDTV Supply

.  

The warranty does not apply to any product or parts thereof where the serial number or the 
serial number of any of its parts has been altered, defaced, or removed.   

The warranty does not cover damage or loss incurred in transportation of the product. 

The warranty does not cover replacement or repair necessitated by loss or damage from any 
cause beyond the control of Tonlyware, such as lightning or other natural and weather related 
events or wartime environments.   

The warranty does not cover any labor involved in the removal and or reinstallation of 
warranted equipment or parts on site, or any labor required to diagnose the necessity for repair 
or replacement.   

The warranty excludes any responsibility by 

HDTV Supply

 for incidental or consequential 

damages arising from the use of the equipment or products, or for any inability to use 
them either separate from or in combination with any other equipment or products.  

A fixed charge established for each product will be imposed for all equipment returned 
for warranty repair where 

HDTV Supply

 cannot identify the cause of the reported failure. 

Exclusive Remedies 

Summary of Contents for HDTVMT0808140






















Reviews: