11 HOMEDEPOT.com
Please contact 1-800-514-6729 for further assistance.
Pre-Operation (continued)
ATTACHING THE HOSE
WARNING
:
Do not attempt to modify this product or
create accessories not recommended for use with this
product. Any such alteration or modification is misuse and
could result in a hazardous condition leading to possible
serious personal injury.
WARNING:
Do not attach the tools to the open end of
the hose until start-up has been completed.
WARNING:
Do not allow familiarity with products to
make you careless. Remember that a careless fraction of
a second is sufficient to inflict serious injury.
WARNING
:
Always wear safety goggles or safety
glasses with side shields when operating power tools.
Failure to do so could result in objects being thrown into
your eyes resulting in possible serious injury.
The compressor is assembled at the factory and
ready for use. Check all components to ensure secure
assembly. (such as: rubber feet, handle, quick connects,
gages, safety valve, drain valve, etc.)
□
Make sure the power to the air compressor is
disconnected.
□
Attach the female quick connect plug (G) to one end
of the air hose (B) using a wrench (not included).
□
Attach the desired inflation tool to the other end of
the air hose (B) using a wrench (not included).
□
Rotate the pressure regulator knob (1) fully
counterclockwise.
□
Insert the hose adapter end of the air hose (B) into
the female quick connect plug (G) end in the air
compressor.
1
G
B
