UK
Disc-Roller 2,5 - 3,0 – 3,5 - 4,0 m (1-section) 12/08-2014
10
Start-up of the machine
General Information
The machine is supplied as standard in transport position. At start-up, attach the machine to the
tractor.
Important:
The machine requires one double-acting outlets (mounted) or two double-acting outlets (trailed).
The hoses for the drawbar - / wheel cylinder are provided with
red
cable straps.
The hoses for the disc cylinder are provided with
green
cable straps.
Attachment, Mounted Model
1.
Reverse the tractor to the machine and attach.
2.
Connect all hydraulic hoses to the tractor outlets.
3.
Lift the machine to maximum transport height.
4.
Unfold the edge equipment to working position.
5.
Now lift and lower the discs to the required working depth.
Attachment, Trailed Model
1.
Reverse the tractor to the machine.
2.
Connect all hydraulic hoses to the tractor outlets
3.
Pressurise the drawbar - and the wheel cylinder (red) so that the machine
drawbar is lifted to the suitable height.
4.
Then reverse the tractor and attach the machine.
5.
Now lift the machine to maximum height and tilt the depth stop backwards
towards the drawbar cylinder.
6.
Unfold the edge equipment to working position.
7.
Now lift and lower the discs to the required working depth.
Check that the towing hook height is between 400 and 500 mm.
Check that the male quick-couplings of the Disc-Roller fit the
female quick-couplings of the tractor.
Summary of Contents for Disc Roller 2,5m
