- 5 –
To ACTIVATE the ESW function:
-
Start the engine and let it idle.
-
In the menu, select the “
E
” sign and do a
long tap
.
The display shows a spinning wheel animation.
-
Start riding. The spinning wheel animation will speed up, indicating that it is
learning the highest RPM value.
-
In 2
nd
gear reach the desired target RPM and keep it steady for about 3 seconds.
-
Slow down carefully and stop (keep the engine running at idle).
“
U
” (update) is shown and the target RPM is programmed.
To DEACTIVATE the ESW function:
-
In the menu, select the “
E
” sign and do a
long tap
.
The display shows a spinning wheel animation.
-
Do a
long tap
.
The target RPM is cleared and the function is deactivated.
Notes:
-
Accessing the ESW function is possible only if the Learning was completed earlier.
-
Running the Learning procedure again will clear the ESW if it was active.
-
If the ESW function is activate and you run the activation procedure again, the
target RPM value will be updated to the new one.
-
The HSW and ESW functions can be used simultaneously if desired. If both the
actual speed and actual RPM values are over the target, the ESW has higher priority
i.e. the display will be flashing rapidly.
6.7.
Flipping the display upside down (or vice versa)
In the menu, select the “
u
” sign and do a
long tap
.
The display is flipped.
6.8.
Resetting all values to factory defaults
In the menu, select the “
d
” sign and do a
long tap
.
This command will restore the factory defaults:
-
Learning: stored gear positions are cleared
-
Filtering: 4
-
HSW: deactive
-
ESW: deactive
-
Brightness: 4
-
Upside down: normal view
7.
Cleaning the display
Clean the display with wet sponge. Use pure water only, without any detergents.
Do not clean with dry cloth as it may scratch the front face. Do not spray high pressure
water directly on the display.
8.
Warranty
The unit is completely sealed and epoxy encapsulated, which gives extreme protection
for the internal parts from shocks, vibrations and water. To ensure trouble-free operation
from the start, all units have been extensively tested prior to shipment.
Our dealers are offering a 30-day money-back guarantee on HealTech products, thus you
will get your money back if the product does not fulfill your expectations. (All parts must
be returned in original condition for full refund.) Furthermore the product is covered by
our 2-year replacement warranty from the date of purchase.
