Mechanical Specifications:
Housings: Precision stamped metal thread screw secured steel
enclosures
Power Supply: 1 x 5V DC 1A
Power consumption: 1.5 watts (TX); 1.0 watts (RX)
Operating temperature: 0 to 40°C Storage temperature -20 to 60°C
Relative humidity 20 to 90 % RH (no condensation)
5. Panel descriptions
5.1 Transmitting unit
1.
HDMI In: Here you connect the HDMI output from your
source equipment, Set Top Box, BluRay, CCTV NVR etc. HDMI
cable excluded.
2.
EDID: Selects Electronic Display IDentification from one of the
HDMI outputs. Switch to LOCal or right, to pass HDMI loop
out display EDID. Switch to REMote or left position to pass
Receiver display EDID to source device.
3.
HDMI out: Connect to HDMI input of local TV or display,
HDMI cable excluded.
4.
IR out: Connect the IR Blaster or Emitter included in the set
for IR signal re-transmission. Place the IR blaster where it has
best line-of-sight view the front of the equipment to be
controlled. The Blaster's adhesive pad may assist fixing in a
convenient position. As the adhesive is single use, you may
wish to test first.
Summary of Contents for HDC6IRL
Page 6: ...7 Connection diagram ...
