1
Hearth & Home Technologies • LOGS-60 Installation Instructions • 2321-948 Rev. D • 10/15
CAUTION:
Logs are fragile, handle with care.
LOGS-60
MODELS: MEZZO
1600
• Installation Instructions •
CAUTION! Risk of Cuts or Abrasions.
Wear protective
gloves and safety glasses during installation.
Leave this manual with party responsible for use and
operation.
Kit Components:
• Burner Port Fixture
• Ceramic Logs (8)
• Shoulder Screws (11)
• Self-Tapping Screws (13)
Figure 1. Burner Features - Shoulder Screw Locations
BURNER PORT FIXTURE LOCATIONS
(PILOT HOLES ON ROCK TRAY)
1 fixture included. Use for two locations. Discard after use.
1
2
5
4
3
10
11
8
7
6
9 (BEHIND FIXTURE)
INSTALLATION
1. Remove decorative front.
2. Remove
fi
xed glass assembly by unlatching the four
top spring latches. Allow the
fi
xed glass assembly to tilt
away from the
fi
replace and lift the
fi
xed glass assembly
up and out of the opening.
3. Lift burner rails out of appliance.
4. Remove any existing media from appliance.
5. Install eleven shoulder screws into pilot holes in media
tray. Locations are indicated in Figure 1.
6. There are twelve burner port holes that must be plugged
in order to prevent sooting. There are in two groups of
six holes. A burner port
fi
xture will be installed on top of
the designated port holes. See Figure 1 for location.
7. Locate the slot on the rock tray and align the burner port
fi
xture over the pilot hole.
8. Place burner port
fi
xture over pilot hole and secure us-
ing a self-tapping screw.
