Thermostat Check
Fig. 3
1. Set the transmitter to the "THERMO" mode
(Fig. 3, #1)
2. Adjust the temperature
(Fig. 3, #2)
two degrees above
desired room temperature using the UP/DOWN buttons
(Fig. 3, #3)
**There will be an two degree Fahrenheit and one degree Celsius temperature
difference to prevent the fireplace from cycling ON and OFF continuously
NO, the thermostat mode is not turning the fireplace "ON' and "OFF"
Action: Replace transmitter
HTI-16-004
TRANSMITTER WALL HOLDER
HTI-14-004
BATTERIES-TRANSMITTER
HTI-13-004
RECEIVER
HTI-12-004-HNG TRANSMITTER -
HEAT-N-GLO
HTI-12-004-HTL TRANSMITTER -
HEATILATOR
HTI-11-004
HARDWARE PACKAGE
SMART-STAT-HNG & SMART-STAT-HTL
REPLACEMENT PARTS
*The remote must be reprogrammed if a power outage has occurred or the batteries have been changed
*Max operational distance is 20 Feet
2
