28
B-2. TV Setting
B. MANAGEMENT INSTRUCTIONS
Channel Setting
1. Connect TV Cable
2. Turn on the power on Control Board Panel.
3. Press Source Button to check if it is TV mode or not.
4. Press EXIT button for 3 sec on Control Board Panel.
5. When you meet Channel Setting Mode on Screen, press
▶
button twice to move to Channel menu. Then press
▼
button
3 times to move to AUTO SEARCH and press
OK
to scan
channels.
6. Wait until TV scans channels
If you operate treadmill during channel scanning, it can make
an error. So please wait until TV finishes to scan channels.
7. Please turn off and turn of the power after finish channel
scanning.
TV Setting